The first thing I did was place my tank, reel, and unprocessed film in the changing bag and zipped the bag close. Inside the bag I unrolled the film and placed it on the reel. Then I placed it in the tank and opened the bag. I poured some presoak in a container and placed the thermometer to get it to 68 degrees and poured it in the tank to sit for 15 minutes. While the film was soaking I poured the developer into its container and temped to 68 degrees. After the pre-soak I poured out the purple kool-aid and set the kitchen timer to 6.5 minutes. I poured in the developer at an angle and tapped the bottom of the tank twice. Then I inverted the container 4 times, tapped the bottom again and let it sit until 30 seconds passed and repeated, then poured the developer out to drain the remaining 15 seconds.
Next, I poured in the stop bath agitating for 15 seconds and then draining for 15 for a total of 30 seconds. I set the timer for 5 minutes and poured the fixer, inverting 4 times and letting it sit for the remaining 30 seconds then repeating. I drained the last 15 seconds.
Once I poured out the fixer I filled the tank with water, inverted the tank 5 times and then drained. I poured in my hypoclear after setting the timer for 2 minutes, agitating for 10 seconds and letting it sit for the remaining 30 seconds. I drained the final 15 seconds.
For my final rinse I poured in the water, inverted 5 times and drained it. Then I refilled it with water and inverted the tank 10 times and drained. Poured in water and inverted 20 times then drained. I poured in some wetting agent and let it sit for 15 seconds and then drained.
Finally, I removed the film from the reel and removed excess water and hung it up to dry in my bathroom. I can't wait to make some prints from my photo safaris at the fair, acid park, and my school assignments!